24 July 2012

Tony’s Home Brew Studio.

Maximizing your studio space with column stanchions and super clamps.

The Studio Set Up from Anthony Zeh on Vimeo.

Many people have little studios in a bedroom, as I do. The problem I kept having was lack of space. My room is 12x11, more like 10x9 when you figure your tripods and light stands can’t get in close to a wall. Not very big for a studio, but doable. I really wanted more space, but knocking down walls was not an option. So I set out to look at the problems and how to solve them. The biggest problem was tripods and light stands can only get in about a foot from the wall and 2 feet in from a corner. If I could get lighting equipment and cameras up to the wall, I could gain back about 2 feet in useful space. Also I hate tripping over the legs of tripods and light stands which is a problem in a small space.  These were the problems I set out to solve.

Studio room filled with light stands and tripods
I have only 8’ ceilings so I decided to find a way to work with that. I figured I could hang something, but the mobility of equipment would become an issue. Then I thought of something I had seen as a contractor, which were supports for creating barriers for remodeling. They were expandable stands that went from floor to ceiling.   With this I could add a Super Clamp and I could solve both of my issues. I could get my lights close to the walls and even in the corners. And no more legs to trip over. This allowed more options and lots of possibilities.

Studio space with support stanchions and super clamps
For a small cost I added about 46 square ft of usable space to my studio in a room that is about 136 sq ft. That’s tremendous. Depending on how many you use, just one stand set up will run you about $50. I got 6 for my space to offer the most versatility. Most people could work with just 3.  I bought these less inexpensive Super clamps for $20 ea. The Monfrotto ones are very nice, but at about $35 each, I opted for the $20 version. They are still solid units. The safety catch on them are not that great, but I have not had any issues. 

For the Stands I used the ones below from Haul-Master. I wouldn't hang anymore than about 15 Lbs of equipment on these, but they are stable. They will extend up to 114" or 9.5 ft. Best deal for the Support BarDepending on your strobe or lighting heads you may have to get longer studs for you Super Clamps or use a Umbrella holder to make the room for your light head.  If you use these Haul master Supports, do not put too much pressure. You may damage your ceiling or break the handle on the support. Just make in nice and snug between the floor and the ceiling. No need to push up your ceiling. The ratings on the supports are mixed, but My feeling are they are stable for the use of light stands, just don't put your strength into tightening as you can break something.

For my crossbar I have a monfortto I bought years ago but for a decent inexpensive one I found a 10' one similar to what I use, see below. For my white vinyl seemless I bought the following and and used Gaffers tape to attach it to a ABS 2"tube from Home depot. It is not attached to the cardboard tube it comes on and the tube is not great for support.

Camera Setup is a cross arm with a lap top stand. Any ball head or pan head with a 3/8" screw will fit. **Note: I did have to modify one of the Super Clamps to make this work.

 I drilled out the center hole on the clamp with a 5/16" drill bit and tapped the hole with a 3/8" tap. These can be bought at Home Depot for about $10.

05 July 2012

Scorpion Plate : A New DSLR Rig

Scorpion Plate : A New DSLR Rig

I am always looking for improvements and alternatives to equipment out on the market which can provide as good or better results than industry standards. The Scorpion plate is a full adjustable DSLR rig which can give you many options to your video filming needs. I like being able  to change configurations on the fly and I like I can use it in a host of applications for my video/film work.

Scorpion Rig
The system is based upon a plate with a number of threaded holes on all sides to allow a variety of attachment points which you can add the popular  magic articulating arms.  With the plate you just add a Monfrotto 577 quick release or the Calumet compatible equivalent, if you are looking for more savings. The unit can use the shoulder brace for more stability  and you can easily make it compatible to slide from one rig to a tripod using Monfrotto video  heads.

Scorpion Plate - PhotoZblog from Anthony Zeh on Vimeo.

If you like this design you can always go with a similar design by Cinevate which has a system which is nice, but too costly for me. For just over the cost of the base plate of their Simplis release plate, I built this whole system.  One of their nice adjustable arms runs about $110 compared to an articulaing arm at about $25.
3 Arm Shoulder Rig

Fig Rig

Parts of the Scorpion rig

Pistol Grip

Upright Rig

Currently this is just a concept , so not available in stores or online. If this is a product people would be interested in, please drop a response. 

19 March 2012

Free 3 day workshop on the Fundamentals of Lightroom 4

Another Great CreativeLIVE Event

I always enjoy the workshops at CreativeLive.  What could be better than a 3 day workshop for free?  This time it's on the new Lightroom 4 software which is now running at half the cost of what Lightroom 3 was.  So for $149, you can have a new professional photography cataloging and adjustment software with a 3 day workshop to boot.  As someone who has used Lightroom for a number of years, I look forward to the upgrades. I thought I would stick with Lightroom  3, because it does everything I need it to do. But I hear Lightroom 4 does it better. I am planning to follow the workshop with a trial version to make sure it is worth the upgrade, but from what I hear, it is.

This work shop at CreativeLive.com will be taught by Laura Shoe, a blogger, instructor, fine art photographer and Lighroom certified expert. This is a fundamentals class, but being a new version, I know I will learn something of the new software. Any course I have watched on CreativeLive, no matter how well versed I am on a subject, I always learn something. Everyone can bring something new to the table with their personal experiences and variety in workflow.

These courses are always free for the first three days to watch the video stream. And if you want to purchase the video's they are at a discount while the steam of the workshop is going on.  This one is $79 for the discounted price if you want to order the videos, then goes up to $99 after the weekend. I have purchased about 6 video workshops in the past do the invaluable information. 

So check out CreativeLive and the Lightroom workshop coming March 29th starting at 9 am. Also track other creat workshops at the CreativeLive Calendar.

17 January 2012

New Build it as you need it DSLR Slider System

Z Slider - Bolt on camera slider drive kit

***Z Slider Kickstarter Launched! 6 Feb 2012 at http://www.kickstarter.com/projects/anthonyzeh/z-slider-system

** Update 3 Feb 2012 - Check out the Kickstarter page more to come for Monday's Launch! http://www.kickstarter.com/projects/anthonyzeh/z-slider-system

**UPDATE 31 Jan 2012 - Update images below with new Logo and black risers - Finishing video to get on Kickstarter this weekend!
*UPDATE 26 Jan 2012 - Kickstarter launch maybe pushed back a couple of days from the 1 Feb 2012 launch date. Final Version being completed with black risers, silver gears, and ZSS (Z Slider System)Logo. (Prototype version shown in video above.)

Kickstarter intro Video:

Z Slider - Bolt on camera slider drive kit from Z Photo Systems on Vimeo.

Z Slider is a new bolt on slide system for DSLR cameras. It’s in the final stages of development. How is this system different from others? It allows you to build a quality slider system at your own pace, at a price that doesn’t wipe out your wallet. You can start by purchasing an Igus w1080 slider system which starts at $131 at Amazon for an almost 40” rail. If you order from Igus directly you can get up to a 70” rail (the longest they can ship via UPS). This gets you on the ground floor of having a slider system. The least expensive system on B&H for just a track of this length will run you about $400. (They plan on designing systems that connect to other Igus track configurations in the future.)

Z Slider System - Customizable, bolt on system to give Dynamic Motion to video.

When you are ready to upgrade to a drive system to have more control over your camera motion, the Z Slider system will allow you to bolt on a hand crank system to your Igus rail. The goal of the system is to allow an upgrade for about $300-$350. This would put your slider system in at $430-480 for a belt drive slider for your filming needs. The bolt on kit will include, the end blocks with hand crank and gears, legs for your slider, a new mounting plate for your camera head, pre-drilled with a 3/8” mounting screw for your camera head and the belt. They also will offer belts for different length tracks, but the 40” rail belt is standard.  The bearing blocks and legs are all machined 6061 aluminum, fabricated in the US.

Hand Crank belt driven system with riser legs

Next when you are ready to upgrade again for about $50 you will get a machined Aluminum motor mount with mounting hardware for a motor. Z Slider will not be supplying the motors, but they will point you to the motor style you will need for their mounting plate. The geared, high torque motors cost anywhere from $10 -$25. These motors are available in speed from .5 rpms on up, but no more than a 10 rpm motor would be needed. Then you will need to find a motor controller. A motor controllers can cost anywhere from $30 to $250, depending on your needs for either Film or Time lapse. On the low end, that’s a system for $550 for a motorized slider. (They may offer these items in the future, but they allow you to shop around for the best price.)

Shown with optional Motor mount

That is one of the least expensive systems, for a customizable system, which you can afford to build one step at a time to your needs. Not a system that you have to but all at once. Not a system that limits you to only the company's own equipment, and it offers you flexibility. With this rail system, you just bolt on to the pre-drilled Igus rail. Replace the slider plate with the new Z Slider plate with risers, and attach the belt and tighten the belt tension unit and crank away.  

Sample of the Z slider in action

 On the inside track, Z Slider still working out the final phases of production. The plan is to make it available on Kickstarter to help in raising production cost, to make it available to the public. The Kickstarter campaign is set to start around the 15th of Feb. If you are interested in this system, help get it funded. You will be able to help by making contribution, for about $10, for which you will get a Z Slider lens cloth. For a bit more you will get a standard system. And you will be able to get an upgrade system with a motor mount, which will also be available. If this is not in your budget at the moment, but you would want this system down the road, think about the $10 donation to help them get into production.

Z Slider Lens cloth with every order.
Check back here for the KickStarter page, future updates, and any other information we can throw your way.