Showing posts with label lithium. Show all posts
Showing posts with label lithium. Show all posts

06 August 2011

Vagabond Mini Lithium - A great little power pack.

Vagabond Mini with Alien Bee 1600 Recycle Test


Ever think about taking your studio strobes on the go? The Vagabond Mini Lithium power pack by Paul C Buff is a great way to go. This unit packs a punch of power at only about 3lbs. I received this unit before I got my Alien Bee 1600 strobes, so my first test was with a couple of Adorama 620 Flashpoint II units. The unit responded well. When I got my Alien Bee 1600 I did a more controlled test. (see video for A/C vs. Vagabond Mini Power Supply.) 



The average recycle time is about double that of direct AC power, but for a 3lb portable power supply, I think it’s a great choice. The old standard Vagabond was about 18 Lbs. That is a 15 lbs weight saving. And though it only has two outlets, you can power up to three units with a power strip. I saw were on was testing with four units, but I think 3 would be the max I would push on this unit.


 What you see on the front of the unit is a Power switch flanked by two 120 V Outlets. There is a battery indicator with three lights indicating ¼, ½ and ¾ + power. The unit also has a 5v USB power supply for cell phones and such, but will not charge an iPad. The unit has a 30A flat fuse which replacements could be picked up at your local auto parts store. 


It also has a clamp on the bottom of the unit to attach it to a light stand. The clamp will not hold the unit where ever you clamp it. It will slide down to the next stop on your light stand. I usually attach my unit to the lowest section and allow it to rest where the three legs come together on the light stand.


These units are well-built and made in the USA. The Batteries come from China and are exchangeable for extended use. The Vagabond Mini Unit runs about $240, Extra Battery is 
about $ 90, and a carrying case is about $15.







Video of Vagabond Mini Power pack in Buff Bag with spare battery.







Video of recycle comparison of Vagabond Mini Lithium power pack vs. A/C power. Great little unit for portability.

DIY Adapter for Adorama Flashpoint II light Modifiers to Alien Bees

OK, this is a simple modification to attach Flashpoint II light modifiers to a Alien Bee. You may ask why? Well my first studio strobes were Flash point 620 units, as I hadn't discovered Alien bees. The flashpoint did me well, but I had one unit burn out. They are a little bulky which I did a lot of location shoots an they were kind of a pain to lug around. So I decided to upgrade to Alien Bee 1600, which are 1/2 the size and twice as powerful. Though I can get speed rings to use my softboxes, I still had a beauty dish and snoot which I couldn't use. So I thought I would go and seek out a DIY solution to connect the two. I was lucky to find just the right fix. See the Video to view the Adapter.



What was needed.
1 NDS 4" adapter (Found in the irrigation isle at Home Depot) $2.50
1/4" hard board or MDF $2.50

Tools
Utility Knife
5" Hole Saw
3 1/2" Hole Saw
Glue to connect wood ring to 4" adapter