$2 fix to secure your Wireless receivers to your monolights.

Securing your Wireless receivers to your Monolights. I found this a quick easy fix for keeping dangling wireless units around my Monolights. I picked up several feet of ¼ / 20 all thread at home depot for $2. I cut the all thread to 6” pieces and threaded onto my wireless receivers. I have images which show them attached to a Pocket wizard and also a Cactus 5 transceiver. I then slid the all thread with the receivers attached into the umbrella holder on my Alien Bee units. This keeps them up, secure and clean looking. This won’t work if you are using umbrellas, but in most cases I am running softboxes or beauty dishes.  So for my needs it’s a great and easy fix.

Pocket wizard with 6" 20 / 1/4" all thread

Pocket Wizard with all thread secured in umbrella holder

Cactus V5 Receiver with 6" 20 / 1/4" all thread

Cactus V5 Receiver with all thread secured in umbrella holder

  

Vagabond Mini Lithium - A great little power pack.

Vagabond Mini with Alien Bee 1600 Recycle Test


Ever think about taking your studio strobes on the go? The Vagabond Mini Lithium power pack by Paul C Buff is a great way to go. This unit packs a punch of power at only about 3lbs. I received this unit before I got my Alien Bee 1600 strobes, so my first test was with a couple of Adorama 620 Flashpoint II units. The unit responded well. When I got my Alien Bee 1600 I did a more controlled test. (see video for A/C vs. Vagabond Mini Power Supply.) 

The average recycle time is about double that of direct AC power, but for a 3lb portable power supply, I think it’s a great choice. The old standard Vagabond was about 18 Lbs. That is a 15 lbs weight saving. And though it only has two outlets, you can power up to three units with a power strip. I saw were on was testing with four units, but I think 3 would be the max I would push on this unit.


 What you see on the front of the unit is a Power switch flanked by two 120 V Outlets. There is a battery indicator with three lights indicating ¼, ½ and ¾ + power. The unit also has a 5v USB power supply for cell phones and such, but will not charge an iPad. The unit has a 30A flat fuse which replacements could be picked up at your local auto parts store. 


It also has a clamp on the bottom of the unit to attach it to a light stand. The clamp will not hold the unit where ever you clamp it. It will slide down to the next stop on your light stand. I usually attach my unit to the lowest section and allow it to rest where the three legs come together on the light stand.


These units are well-built and made in the USA. The Batteries come from China and are exchangeable for extended use. The Vagabond Mini Unit runs about $240, Extra Battery is 
about $ 90, and a carrying case is about $15.

Video of Vagabond Mini Power pack in Buff Bag with spare battery.

Video of recycle comparison of Vagabond Mini Lithium power pack vs. A/C power. Great little unit for portability.

DIY Adapter for Adorama Flashpoint II light Modifiers to Alien Bees

OK, this is a simple modification to attach Flashpoint II light modifiers to a Alien Bee. You may ask why? Well my first studio strobes were Flash point 620 units, as I hadn't discovered Alien bees. The flashpoint did me well, but I had one unit burn out. They are a little bulky which I did a lot of location shoots an they were kind of a pain to lug around. So I decided to upgrade to Alien Bee 1600, which are 1/2 the size and twice as powerful. Though I can get speed rings to use my softboxes, I still had a beauty dish and snoot which I couldn't use. So I thought I would go and seek out a DIY solution to connect the two. I was lucky to find just the right fix. See the Video to view the Adapter.

What was needed.
1 NDS 4" adapter (Found in the irrigation isle at Home Depot) $2.50
1/4" hard board or MDF $2.50

Tools
Utility Knife
5" Hole Saw
3 1/2" Hole Saw
Glue to connect wood ring to 4" adapter